- Car Black Box[27]
- Navigation & GPS[32]
- Keyboards[2]
- Laptops[32]
- PC Power Supplies[1]
- Digital Batteries[1]
- Feeding Supplies[28]
- CCTV Camera[37]
- Corded Telephones[32]
- Mobile Phone Chargers[3]
- Mobile Phones[33]
car vehicle gps tracker car gps tracker device/personal car gps tracker/gps/gsm/gprs car tracker
1)Vehicle GPS tracker
2)Based GSM/GPRS/GPS
3)SMS or GPRS tracking
4)GPS chipset:SirFIII chipset
5)3 band or 4 band
Mini Car Gps Tracker
GSM/GPS/GPRS
Small,Simple & Save your money
Special Points
1. Build-in GPS antenna and GSM antenna (optional: also support external GPS & GSM antenna)
2. Mini size: 50mm x 45mm x 21mm
The two points above make the tracker easily can be install many place of car even rearview mirror place;
make it more like a car accessories in steady of GPS tracker to prevent it to be cut off by car theft.
Basic features
The size is very small but it has all the functions of other car GPS tracker:
1. Remote configure setting via GSM
2. Real-time dynamic tracking
3. Car location inquiry
4. Over speed alert
5. Geo-fence alert; Destination alert
6. Data Logger
7. Mileage accumulation
8. SOS alert: Send SOS alert to monitor center (optional)
9. 2 way voice communication (optional) & Voice monitor (optional)
10. Remote cut oil via GSM (optional)
11. Remote cut electricity via GSM (optional)
12. Video surveillance (optional)
Specification
GSM module | GSM900/18000MHz,GSM850/1900MHz (optional or quad band) |
GPS chipset | Sirf |
GPS sensibility | -159dBm |
GPS centre frequency | L1, 1575.42MHz |
GPS Positioning accuracy | 5-25 meter |
Speed precision | 0.1 Meter/S |
Time precision | Sync to GPS |
Default data | WGS-84 |
Hot start | 1S |
Cold start | 38S |
Maximum altitude | 18000Meter |
Maximum speed | 515 Meter/S |
Gravity acceleration | less than 4g |
Others
Operating temperature | -20---65°C |
Humidity | 5%---95% |
Dimensions (mm) | 50*45*21 |
Voltage | 12V—24V |
The average standby current | > 80MA |
LED |
|
External SOS alarm switch | SOS alert |
Device Description
1. Pins definition
Pin1: External power supply: positive input pin: voltage range: DC +6V—+24V.
Pin2: External power supply: negative input pin, connect to GND
Pin3: Positive output pin control by Relay: voltage +12 V, the process of using non-grounded.
Pin4: Negative output pin control by Relay: connect to GND.
Pin5: Serial port: to receive data. (RX data port).
Pin6: Serial port: to transmit data. (TX data port).
Pin7: Emergency SOS alarm signal input port, normal, high level, low input activate SOS alarm.
Pin8: External state signal input: TA. Normally is low, high external input indicate incident
Pin9: On button input port: normally is high level, low input will activate to turn on unit.
Pin10 External input signal reference, connect to GND
Pin11 External microphone input port: positive MIC +.
Pin12 External microphone input port: negative MIC +.
Pin13 External battery input: positive BAT +. Input voltage for + 3.6-4.2 V,
Input voltage exceed designated areas will likely permanent damage to the machine.
Pin14 External battery input: negative BAT -. Connect to GND
2. Install SIM card
Open housing and install SIM as photo:
3. Connect wires:
Basic function: Just connect two power pins (Pin1 & Pin2)
Optional functions: function 8,9,10,11,12 It need connect relative wires and accessories.
4. Optional accessories: Power cutting relay, SOS switch,MIC
Remark:
If your company has your own communication protocol, we can develop relevant device software to support.